Eco Hydro Kit IP is the built-in thermal module for MIRAI-SMI 4.0 heat pump systems in sizes 6kW and 10kW.

It represents the ideal solution for the production of domestic hot water in combination with the MIRAI-SMI 4.0 heat pump, for flats in which you do not want to opt for the heat pump water heater, as it is potentially noisy and its installation would require the need to drill holes in the masonry to bring the air ducts outside.
Ideal for installation in new apartment buildings (e.g. in terraces) or in single houses, both new and refurbished, with the possibility of off-site installation.


Contruction
- 150 liters domestic water cylinder, vitrified
- Electronic anode to protect the domestic water cylinder
- Integrated heating element for the production of DHW, power 2 kW
- DHW temperature probe to be installed on the cylinder and connected in the terminal block to the MIRAI-SMI 4.0 heat pump
- 35 liters inertial storage tank
- Expansion vessel 7 liters for primary heating/cooling circuit
- Expansion vessel for domestic water circuit 8 liters
- 3-way diverter valve, domestic water priority
- Air vent valves

- DCW shut-off valve

- Non-return valve
- Pressure gauge installed on the primary circuit
- Primary circuit fill valve
- Water drain valve on DHW storage

Technical data of DHW storage tank
- Capacity: 150 l
- Maximum operating pressure: 6 bar

- Standing loss S: 76.1 W (UNI EN 12897 with Twater = 65 °C and Tambient = 20 °C)

- Specific standing loss: 1,69 W/K

- Energy efficiency class: C (min F/max A+)

Technical data of inertial storage tank
- Total capacity (effective volume): 35 l
- Maximum operating pressure: 3 bar if combined with heat pump
- Standing loss S: 51.2 W (UNI EN 12897 with Twater = 65 °C and Tambient = 20 °C)
- Specific standing loss: 1.38 W/K

Operating range
- Internal temperature: 0 – 40 °C
- Water temperature: 5 – 60 °C

Dimensions [WxDxH]: 600x350x2200 mm.