Floor-standing heat pump for the production of domestic hot water.

Construction of the cylinder
- Cylinder in AISI 316L stainless steel
- Insulation in rigid polyurethane foam without CFCs and HCFCs, with average thickness 50 mm
- Supplied standard with electronic sacrificial anodes
- Supplied standard with no.1 integrated 1.5 kW heating element
- Capacity: 200 litres, 300 litres
- Coil for connection to a solar thermal circuit
- Complete with recirculation ring and accompanying “pressure-temperature” safety device

Construction of the heat pump
- Rotary type compressor positioned on rubber vibration damper supports to reduce the transmission of vibrations to the entire system
- Refrigerant used R134a
- Aluminium condenser exchanger outside tank
- Radial fan

Construction of the shell
- Grey-silver shell and front panels in ABS
- Air inlet and outlet fittings with diameter 150 for optional connection of a ducted air extraction system with diameter 160 and total length up to 10 m
- “Touch screen” backlit control panel to facilitate the setting of various operating parameters: unit power-on and power-off, setting of timer for operation within the 24 hours, water temperature regulation, activation of electric heater and management of the circulator for solar collectors through a dedicated probe

Technical data
- Refrigerant: R134a (GWP = 1430): 1,25 kg / 1,79 tCO2 eq
- Maximum operating pressure: 7 bar
- Water/air operating limits: 9÷60 °C / -5÷43 °C
- Power supply: 230 Vac/1ph/50 Hz
- Compressor nominal absorbed power: 440 W
- Maximum absorbed power: 2,050 W
- Maximum absorbed current: 8.92 A
- Protection rating: IPX1B
- Nominal air flow rate: 400 m3/h
- Effective static pressure: 40 Pa
- Connections (left side): 3/4” female
- Dimensions WxHxD (mm): 566x1730x590 (mod. EQ 2021), 642x1804x664 (mod. EQ 3021 ES)
- Air duct dimensions: D160, maximum length 10 metres