Wall mounted water heater heat pump, for the production of domestic hot water.

 

Domestic hot water heating in heat pump mode up to 60 °C.

Integrated electric resistance, which can be activated by means of a special command placed on the control panel, to heat the water from 60 to 70 °C.

 

- S235 JR steel tank, 110 liter capacity, with internal inorganic enamelling treatment (vitrification)

- Insulation in high thickness rigid polyurethane foam free from CFC and HCFC

- Sheet metal casing painted with epoxy powders and ABS plastic material, white

- Protection by 1 Mg anode

- Hydraulic fittings positioned in the lower part

- Steel condenser exchanger outside the tank (not immersed in water)

- 1.5 kW electric heating element

- Rotary compressor for maximum efficiency and quietness of the unit

- Centrifugal fan

- Finned pack evaporator

- Refrigerant fluid: R134a

- Safety thermostat set at +85 °C

- ON-OFF contact to start the unit from an external switch

 

- bracket, screws and wall plugs

- spacers for wall support

- dielectric joints

 

- R134a refrigerant fluid (GWP = 1430): 650 g

- Maximum working pressure: 6 bar

- Water/air side operating limits: 5÷90 °C / -5÷43 °C

- Power supply: 230 Vac /1ph/ 50 Hz

- N° and power of electric heaters: 1 x 1.5 kW

- Maximum absorbed power: 1900 W

- Maximum current consumption: 8.3A

- Degree of protection: IPX1

- Connection attachments (lower): 1/2” male

- Dimensions W x H x D: 500 x 1407 x 520 mm

- Air ducts: Ø125 mm

- Empty weight: 72 kg

- Weight with water: 182 kg