SSX 12-38 NP
Complete solar station SSX 12-38 NP, to be installed on the flow and return lines of the solar system.
Return line
- Flow meter regulator with system fill and drain valves
- 3-way flanged ball valve DN 20 with non-return valve 10 mbar (non-return valve can be excluded by turning the handle by 45°) with thermometer handle (thermometer with blue ring; 0 °C - 120 °C)
- Safety group 6 bar with pressure gauge Ø50 mm 0-10 bar with 3/4" M connection for expansion tank, thread: R (UNI EN 10226-1)
- Circulator Para STG 25/7 (control with PWM2 signal (solar) via EMCS 2015 controller, fixed speeds, Delta p constant, PWM1 (heating))
Supply line
- Flanged ball valve DN 20 with non-return valve 10 mbar (non-return valve can be excluded by turning the handle by 45°) with thermometer handle (thermometer with red ring; 0 °C - 120 °C)
- Brass deaerator with manual vent valve
- Connecting and connecting pipe
Composition
- Pre-wired EMCS 2015 solar controller including 3 PT1000 immersion probes with silicone cable
- Equipped with rear metal fixing plate
- EPP insulation box (dimensions 308 x 434 x 169 mm)
Technical Data
- Power supply: 230 Vac +10% / -15%, 50/60 Hz
- Stand-by power consumption: circulator: 0.8 W, solar controller: 0.5 W
- Nominal pressure: PN 10
- Continuous temperature 120 °C (short time: 160 °C for 20 sec.)
- Centre distance 125 mm
- External connections 1" male, thread G (ISO 228-1)
| Model | Q.ty per pack. | Code | |
|---|---|---|---|
Model SSX 12 NP | Q.ty per pack. 1 pcs | Code 02716930 | |
Model SSX 38 NP | Q.ty per pack. 1 pcs | Code 02716932 |