Thermostatic regulation head for use with Emmeti thermostatable and thermostatic valves.
Complies with requirements of standard UNI EN 215.

Composition
- Regulation knob in ABS, white RAL 9003
- Basket in reinforced PA 6.6
- Thermostatic liquid expansion sensor
- Ring in spring-steel
- Pusher in natural acetal resin
- Spring in D UNI 3823 nickel-plated steel
- Stem in natural acetal resin
- Base in reinforced PA 6.6
- Pin for limiting temperature in blue and red, in acetal resin
- Ring nut M 30x1.5 made of PA 6.6 (50% GF)

Technical data relative to coupling of Sensor Eco thermostatic head with thermostatic and thermostatable Full valves
- Maximum operating pressure: 10 bar
- Maximum differential pressure: 1 bar
- Differential pressure influence: 0.3 K
- Maximum ambient temperature: 40 °C
- Maximum system water temperature: 100 °C
- Storage temperature: - 10 °C ÷ + 50 °C
- Regulation range: 7÷ 28°C
- Maximum lift: 0.22 mm/K
- Hysteresis: 0.6 K
- Antifreeze trip: 7°C
- Right-angle Full valve nominal flow rate: 180/l/h
- Authority: 0.88
- Water temperature influence: 1K
- Response time: 25 minutes