Dry Alu Floor insulating panel
The Dry Alu Floor insulating panel for underfloor heating/cooling applications is the ideal solution for installations requiring a minimum thickness, reduced weight on slabs, fast installation and use of the system, and is particularly suited for building renovations.
Dry Alu Floor has in fact been developed for installations with dry laying systems, without a screed, applicable on existing floors or perfectly flat substrates; pipes are laid with a serpentine layout.
The panel is made from expanded polystyrene (such as EPS 200) for thermal insulation, with a shaped surface with longitudinal and perpendicular conduits (pitch 150 mm) for 17x2 pipes, bonded with aluminium conductive foil (thickness 0.3 mm).
The dry system is intended for civil buildings, since the absence of the screed does not ensure a suitable resistance to high loads on the flooring.
The characteristics of reduced weight and extremely fast installation make it especially suitable for applications on wooden floors or in rooms heated occasionally (conference halls, holiday homes, etc.).
The floors can be laid immediately after testing, saving about 30 days compared to traditional systems.
Dry Alu Floor panels are produced in accordance with standard UNI EN 13163 (thermal insulation for buildings - factory made expanded polystyrene (EPS) products) and certified according to Regulation (EU) N. 305/2011.
Dry Alu Floor has in fact been developed for installations with dry laying systems, without a screed, applicable on existing floors or perfectly flat substrates; pipes are laid with a serpentine layout.
The panel is made from expanded polystyrene (such as EPS 200) for thermal insulation, with a shaped surface with longitudinal and perpendicular conduits (pitch 150 mm) for 17x2 pipes, bonded with aluminium conductive foil (thickness 0.3 mm).
The dry system is intended for civil buildings, since the absence of the screed does not ensure a suitable resistance to high loads on the flooring.
The characteristics of reduced weight and extremely fast installation make it especially suitable for applications on wooden floors or in rooms heated occasionally (conference halls, holiday homes, etc.).
The floors can be laid immediately after testing, saving about 30 days compared to traditional systems.
Dry Alu Floor panels are produced in accordance with standard UNI EN 13163 (thermal insulation for buildings - factory made expanded polystyrene (EPS) products) and certified according to Regulation (EU) N. 305/2011.
| Model | Insulation thickness [mm] | Thermal resistance [m²K/W] | Density [kg/m³] | m²/pack | Code |
|---|---|---|---|---|---|
Model 1200 x 600 x 28 / H10 | Insulation thickness [mm] 10 | Thermal resistance [m²K/W] 0,65 | Density [kg/m³] 30 | m²/pack 11,52 | Code 28134100 |