Control T - Normally closed electrothermal head with micro auxiliary contactor (1 A 250 V), to be installed on the single branch of a manifold, which is opened when powered by a dedicated electronic control (e.g. room thermostat), allowing independent control of each single zone or circuit or heating unit.
It is therefore possible to manage centralised systems developed with a single manifold, as independent zones controlled by the relative thermostats.
When the electrothermal head is almost completely open, the micro auxiliary contactor (free contact) can activate an auxiliary load (e.g. heat source, zone valve, circulator, etc.).

Technical specifications:
- Power supply: 230 Vac or 24 Vac
- Absorbed power: 3.45 VA (230 Vac versions); 3 VA (24 Vac versions)
- Inrush current: 0.25 A (230 Vac versions); 0.35 A (24 Vac versions)
- Protection rating: IP40 (IP 44 in vertical position).
- Cable length: 1 m.
- Opening/closing time: 5-6 minutes.
- Capacity of auxiliary contact: 1 A – 250 V.

Construction:
- Case in white polycarbonate.
- Spring in stainless steel.
- Indicator in PPA (35% FV), black.
- Ring nut M30 x 1.5 in PA 6.6 (50% FV).
- Cable in PVC.
- Wax electrothermal actuator.

The Control T electrothermal heads can be used with: Topway S and Topway bar manifolds with valves, Tris 3 thermostatic valves, Full and Poker thermostatic and thermostatable valves.
For use with non-Emmeti manifolds, it may be necessary to use the adapter code 90039364.