6-channel RF wireless electronic actuator.
Each channel can be controlled by the corresponding RF wireless thermostat, operating as a normal remote actuator (e.g. heat source consent).
Additional contact with activation after a settable delay from the closure of one of the previous contacts.

DIN rail installation.

Includes
- Device status green indicator LED (powered)
- Outputs 1-6 status red indicator LEDs
- Output 7 status yellow indicator LED
- SET programming and channel reset key
- Trimmer for setting of relay 7 trip delay

Technical data
- Power supply: 230 Vac, 50/60 Hz
- Absorption: 3 W
- 6 contacts with instantaneous activation/deactivation, from reception/absence of relative command signal
- Additional channel contact with activation after settable delay from 3 seconds to 5 minutes after the first closure of one of the previous 6 contacts, and instantaneous deactivation when all contacts are completely opened
- Contact rating (normally open): 5 A,230 Vac
- External antenna supplied standard
- Maximum distance from transmitter: 30 m (in residential domestic environment)
- Dimensions: 4 DIN modules (87x72x65 mm)
- Protection rating: IP21