Electronic programmable thermostat with Wi-Fi connection, with weekly programming and wall-mounted installation, designed for room temperature control both in heating mode (winter) and in cooling mode (summer).

The free “Emmeti Sintesi” App, available on AppStore (for iOS systems) and Google Play (for Android systems) and compatible with Google Home and Amazon Echo, allows programming and total control even from your smartphone or tablet.
Any alarm situations are notified by sending an email to the specified address.

The keypad has four touch keys located on the sides of the display.

Technical data
- Mounting: on the wall or on standard 503 type box
- Power supply 230Vac (-15% ÷ +10%) 50/60Hz
- Maximum consumption: 6 VA / 230Vac
- Relay rating at 250 Vac: 5 A
- Operating mode: summer/winter/off
- Type of regulation: ON/OFF or proportional
- Differential: 0.1 ÷ 1 °C
- Programming: weekly, minimum 1 hour intervals
- Settable temperatures: 3 + manual + antifreeze
- Settable setpoint: 2÷50 °C
- Measured temperature resolution: 0.1 °C
- Measurement precision: 0.5 °C
- Antifreeze temperature (excludable): 1 ÷ 50 °C
- Power-on delay: 15, 30 or 45 minutes
- Clock precision: ± 1 s/day
- Keypad lock with password to prevent unauthorised changes
- Automatic adaptation to daylight saving time and automatic date and time synchronisation when connected to the internet
- Operating temperature: 0 ÷ 50 °C
- Storage temperature: -10 ÷ 65 °C
- Operating humidity: 20% ÷ 90% non-condensing RH
- Protection rating: IP40

Delegated Regulation (EU) no. 811/2013; attachment IV-3:
– Class of the temperature control device: Class 4; Class IV
- Contribution of the temperature control device to the seasonal energy efficiency of room heating in %: 2%

Dedicated "Emmeti Sintesi” App, which allows thermostat control by remote from your smartphone or tablet, in details:
- Turn the climate control system on or off
- Create and modify weekly programs
- Change the operating temperature values
- Simplified programming thanks to the possibility to copy & paste a program on different days
- Configure days of non-use (system stays off)
- Configure an email address to receive notifications when the measured temperature exceeds the minimum or maximum set value
- Keypad lock function (“local operation lock”), allowing the device to be controlled only from the App itself