X-ONE needs just a simple wall where two 16 cm diameter holes can be drilled for the external air inlet and outlet. 

They are equipped with vents closing when the unit is off, reducing this way environmental impact to a minimum, avoiding unnecessary draughts and the intrusion of insects or other foreign bodies when unit is not operating. 

By the introduction of the new DC Inverter models, it is possible to find the suitable model for any type of installation: at the top or bottom of the wall, in the corner or on the side of French windows, just an external wall is needed.

Using latest generation components such as DC electric fans and a brand new BLDC (brushless direct current) inverter adjustment, X-ONE offers great efficiency and a low noisiness level.

X-ONE 1022DC-O model
EMMETI with X-ONE has created a solution that represents a significant step forward in further reducing the aesthetic impact of air conditioners.
With only 16 cm depth for horizontal configuration, X-ONE is by far the thinnest and least bulky in its category; the aesthetic impact is therefore minimal, both inside and out.
With the introduction of Inverter technology, X-ONE offers the best in terms of acoustic comfort (noise) and performance: reduction of consumption, maintenance of the best temperature and humidity level in the environment.
With the use of a brand new BLDC (brushless direct current) Inverter regulation, vibrations have been eliminated; both fan motors are BLDC direct current. Energy consumption is very low thanks to adsorption values that, in partial load, are lower than 300 W. 

Very high EER values permit to achieve the “A+” energy efficiency class, the best in the category of installed air conditioners without outdoor unit. Maxi-mum installation flexibility guaranteed by the choice between horizontal or vertical model.

The heating capacity of an air heat pump is reduced when the outside temperatures drop. Sufficient thermal capacity of the air conditioner is often required even at very low outdoor temperatures. 

For this reason, EMMETI has developed the “X-ONE 1122DC-O” version where the heat pump operation is integrated (not replaced) by a 900 W electrical resistance that automatically intervenes for very low outdoor temperatures or to rapidly heat up very cold environments.

This way X-ONE 1122DC-O can ensure a thermal power in heating over 2 kW even at -7 °C with an additional power consumption equal to 900 W, compatible with the one normally available in homes. 

X-ONE 1122DC-O can really be the only heating source for domestic heating, even in the presence of particularly severe, cold climates.

X-ONE is equipped with a WI-FI module that allows you to use your device as a remote control.

If the air conditioner is installed in a room where there is sufficient router WI-FI signal accessing the internet and a limited number of WI-FI networks, after having downloaded the appropriate “Emmeti X-ONE” APP from the stores (Android or iOS), it is possible to manage the operation of the air conditioner even away from home, thus optimizing both the comfort and air conditioning system efficiency.