Air conditioner without outdoor unit X-ONE vertical
The new monobloc air conditioner X-ONE, is the ideal solution for buildings with special architectonic requirements or where particular town planning restrictions prevent the installation of the traditional Outdoor Unit.
X-ONE needs just a simple wall where two 16 cm diameter holes can be drilled for the external air inlet and outlet.
They are equipped with vents closing when the unit is off, reducing this way environmental impact to a minimum, avoiding unnecessary draughts and the intrusion of insects or other foreign bodies when unit is not operating.
By the introduction of the new DC Inverter models, it is possible to find the suitable model for any type of installation: at the top or bottom of the wall, in the corner or on the side of French windows, just an external wall is needed.
Using latest generation components such as DC electric fans and a brand new BLDC (brushless direct current) inverter adjustment, X-ONE offers great efficiency and a low noisiness level.
X-ONE operating modes can be selected via the appropriate remote control or the control panel on board, where status and operating conditions are displayed.
X-ONE 1020DC-V (Inverter) model EMMETI has made the Inverter technique perfect so to have the best in noise level and performances, therefore with further reduction of con-sumption and better maintain of set temperature and humidity in the room. This is thanks to the most innovative BLDC (brushless direct current) Inverter control, so to get the best from this technology: any vibration has been eliminated. Both fan motors are BLDC.
Energy consumption is very low thanks to adsorption values that, in part load, are lower than 300 W. Very high EER values permit to achieve the “A+” energy efficiency class, the best in the category of installed mono-bloc air conditioners.
Maximum installation flexibility guaranteed by the choice between horizontal or vertical model.
Integrated management
All X-ONE air conditioners are equipped with a control panel that allows you to view the operating status and to set any function including a “block” function that avoids any inappropriate use.
An infrared remote control is also supplied as standard, making it possible to set the main functions of the air conditioner even remotely.
Control via App
X-ONE is equipped with a WI-FI module that allows you to use your device as a remote control.
If the air conditioner is installed in a room where there is sufficient router WI-FI signal accessing the internet and a limited number of WI-FI networks, after having downloaded the appropriate “Emmeti X-ONE” APP from the stores (Android or iOS), it is possible to manage the operation of the air conditioner even away from home, thus optimizing both the comfort and air conditioning system efficiency.
| Model | Energy efficiency class Cooling/Heating | Cooling Capacity [kW] nom (min-max) | Heating Capacity [kW] nom (min-max) | EER/COP | Sound power level [dB(A)] | Q.ty per pack. | Code | |
|---|---|---|---|---|---|---|---|---|
Model X-ONE 1020DC-V | Energy efficiency class Cooling/Heating A / A | Cooling Capacity [kW] nom (min-max) 2,33 (0,92 - 3,11) | Heating Capacity [kW] nom (min-max) 2,34 (0,79 - 3,05) | EER/COP 2,8 / 3,2 | Sound power level [dB(A)] 58 | Q.ty per pack. 1 pcs | Code 07010905 |
Cooling performance under the following standard nominal conditions: - internal temperature = 27 (19) °C - external temperature = 35 °C Heating performance under the following standard nominal conditions: - internal temperature = 20 °C - external temperature = 7 °C Data in accordance with EU Regulations no. 206/2012, n. 626/2011. Harmonized standard applied: EN 12102-1:2017, EN 14511:2013. Refrigerant: R410A (GWP = 2088). Power supply: 230 Vac/1 ph/50 Hz. |