Right-angle Progress ball valves with thermometers and pipe unions
Progress angle valve kit with thermometers and pipe unions for Topway brass manifolds.
Technical data
- Valve body thread with Female connection: UNI EN 10226-1 (ISO 7-1: 1994)
- Male connection valve sleeve thread: UNI EN ISO 228-1
- Shank and nut thread: UNI EN ISO 228-1
- FULL PASSAGE
Flow direction: in both directions
Minimum and maximum working temperature: -20 °C/+ 120 °C **
Maximum pressure (T = 120 °C): 10 bar
Nominal pressure (T = 20 °C): see table below
** In the absence of steam; use with water and glycol mixtures for temperatures below 0 ° C
The valves must be used in the fully open or closed position.
Sealing O-Ring
- Upper shaft seal O-Ring: VITON 70 Sh A (ASTM D2240)
- Lower shaft seal O-Ring: EPDM Peroxide 70 Sh A (ASTM D2240)
- Shank O-Ring: Peroxide EPDM 70 Sh A (ASTM D2240)
Thermometer scale 0-80 °C.
It can also be used in combination with Topway S manifolds, replacing the black O-Rings with the red ones supplied in the package.
| Model | PN | Q.ty per pack. | Code | |
|---|---|---|---|---|
Model 1" | PN 30 bar | Q.ty per pack. 1 pcs | Code 01306264 |